© 2017 Seventh Density

  • Black Pinterest Icon
  • Black Facebook Icon
  • Black Yelp Icon
  • Black Twitter Icon
  • Instagram Social Icon
  • Black Google+ Icon
  • Black LinkedIn Icon

I'm busy working on my blog posts. Watch this space!

Please reload

Follow Us

January 23, 2018

With this design I wanted to create a fire simulation using LEDS. There are 7 short LED strips mounted internally which are diffused through a 3d printed shade/lens that helps spread out the light and visually merge each led with the one next to it. This runs on an ard...

September 1, 2017

I recently challenged myself with a project that required milling on two sides of the parts in the design. Doing this requires removing the stock, in this case a mahogany board, and flipping it over so the mill can reach the back side. The difficulty is in maintaining...

I recently had the opportunity to help a friend, Brad Isdrab, with his pan-tilt-zoom stop motion camera rig. He was having trouble 3D printing some herringbone gears needed to couple the servo motors to the frame. He was working with ABS plastic and the gears were not...

June 16, 2017

I recently had the opportunity to work and a really interesting piece. A customer wanted to take some artwork they had made in have it turned into an illuminated acrylic sign. The design was shaped like a egar and I decided to hold it be the edges so I could project li...

Please reload

  • Facebook Basic Square
  • Twitter Basic Square
  • Google+ Basic Square

January 23, 2018

Please reload

Recent Posts
Search By Tags
Featured Posts

I'm busy working on my blog posts. Watch this space!

Please reload

Archive
Please reload

This site was designed with the
.com
website builder. Create your website today.
Start Now